Altering Cyanotype Prints

 At the Red Thread Retreat, we enjoyed learning ways to alter our cyanotype images by using different chemicals and techniques. Serendipity is also a big part of the process. Even though you change things up from a traditional blue and white cyanotype print, you never know what you will get when you start adding other components to the experiment.  There is a lot you also don't have control over such as the amount of sunshine, the humidity and the angle of the sun.  You can somewhat control other additives to the botanicals placed in your design.

To end up with the image above, a piece of watercolor paper which had been treated with the Jacquard Cyanotype chemicals was used. Once the botanicals were added some turmeric and then Ferrous Sulfate was sprinkled around the edges of the plants.  The very interesting results on the left of the paper was from a leaf that had many holes in it having fallen on a gravel parking lot and been run over by cars.  The piece was also lightly misted with a vinegar and water solution.

For an October day we were fortunate to have warm temperatures hoovering in the high 70s to 81 with lots of sunshine so the paper. with plants and chemicals incased under a piece of glass, sat out in the sunshine of the parking area for at least half a day to "cook".

When the botanical materials were removed, the image looked like this but it still needed rinsing off in cool water to remove all the chemicals.  Before rinsing it looked like this:

The development process can still continue for a day or so, the final image looks like this now.  It might get cut up to put into a new collage and likely that geode looking area on the left will be a highlight of a new piece.